Hailo10h card with xilinx pcie

I am trying to use the hailo10h m.2 card with a xilinx fpga. I am having issues when the firmware is programmed and the 10h reboots. The FPGA pcie driver reports “Link Lost” but the xilinx pcie driver does not seem to attempt any recovery after this. The hailo-pcie driver is waiting for a boot IRQ, but because the link has been lost and not recovered, this never arrives. There is then a kernel panic when the driver tries to read the now nonexistent BAR.

Has anyone used the 10h with xilinx pcie and can advise? Is it strictly necessary for the 10h to reboot, or could I disable that in the hailodriveR?

Thanks