Did you post the entire output? If you have an original Hailo-8 M.2 module installed in your system I would expect three additional values (Serial Number, Part Number and Product Name). Please see the following post for an example:
Hailo Community - How can I know the Hailo8 revision, serial number and firmware version
You can also use the --extended flag to get further information. Example output in the same post above. You should see the following line:
Device supported features: Current Monitoring, PCIE
Not all systems with a Hailo-8 have the INA current sensor on board. It is an optional component. All official Hailo-8 M.2 modules do have an on-board INA device.
There is only one firmware for all Hailo-8 and Hailo-8L devices. It is installed by the PCIe driver installer. You do not need to configure anything special.