Error while running face-recognization of Tappas

[vinaygouda.ttssl]

@Nadav

Upgrade HailoRT to 4.18 on RPI

Guide: Installing HailoRT 4.18 and Driver on Raspberry Pi 5 This guide covers the manual installation of HailoRT 4.18 and its driver on a Raspberry Pi 5, including setup for the Python API. Clean Installation Step 1: Remove Old Installations Run the following commands: sudo dpkg --purge hailort hailo-all hailofw hailo-tappas-core-3.28.2 hailort-pcie-driver Then, check for any remaining Hailo files: find /usr/lib/ | grep hailo Delete any remaining Hailo files found. Step 2: Install DKMS Ens…

and downloaded as shown by @omria